Beli jual agitator di monotaro.id
/q3P101502939-2.jpg)
Kami Menampilkan Rekomendasi Kami Untuk Anda! Anda Bisa Membelinya Kapan Saja di monotaro.id
ANEST IWATA AgitatorDeskripsi:It is a stirring performance that overturns the conventional stereotype. Applications : and paint agitationatribut:- Stirring Shaft Material: SUS303
- AS ONE Air Agitatoratribut:
- Number of Steps: 1
- Body Dimensions (mm): 135 x 94 x 222 (including exhaust port and silencer)
- AS ONE Part Number: 1-787-02
- Air Cost (m³/minute): 3
- Air Pressure (MPa): About 0.59
- Specification: With silencer, with ball valve
- Blade (mm): 100
- Hose Diameter (mm): 6.5
- Hose Fitting: PT1/4
- Mass (kg): 2.2
- Material (Shaft): Stainless steel (SUS304)
- Maximum Torque: 15.7(J)
- Output (kW): 0.28
- Overall Length (mm): 750
- Rotation Speed (rpm): -1
- Shaft Diameter (mm): 12×470
- Anzen AgitatorDeskripsi:Anzen has been designing and manufacturing high quality spray guns for profesional and industrial uses. We produce spraying equipment with utilises the latest and most advanced manufacturing technology. We provide the highest customers satisfaction.atribut:
- Air Inlet Adj Valve: PT-1/4 x1
- Maximum Pressure (bar): 6
- AS ONE Tornado Agitator High OutputDeskripsi:A small, high-output, low-coking, low-vibration, low-noise DC brushless motor with a newly designed magnetic circuit (PAT) is used, allowing stirring work to be performed without compromising the experimental environment. The speed feedback system always responds to changes in the load during stirring and maintains the set rotation speed. The safety device is standardly equipped with a fail-safe function (automatically stops the motor when the chuck cover is opened) that interlocks the motor operation with the current limiting circuit, thermal protector and chuck cover. A forward/reverse rotation function is also standard equipment, and the direction of rotation can be switched with a single touch even during stirring. The setting of ON/OFF and number of rotations adopts the volume method with a switch, and it is excellent in operability. A hand-tightened chuck that does not require a chuck handle is used, and one-handed operation is possible with the motor lock mechanism linked to the chuck cover. The agitation shaft is supported by a collet method, which has high retention force and suppresses core run-out, and supports forward/reverse function (the diameter of the agitation shaft can be changed with an optional collet).atribut:
- Power Supply (V): 100 (AC) (50/60Hz)/(140VA)
- Function: Forward/reverse switching function
- Chuck: Collet type manual chuck for 8mm
- External Dimensions (mm): 98×155×164
- Rotation Control: Speed feedback control
- Accessories: Clamp x 1, Stirring rod 8 x 495mm x 1, Stirring blade propeller type 50mm x 1, Ground adapter x 1
- Mass (kg): 3.5
- Motor: DC brushless motor 50W (Class B insulation/130℃)
- Rotation Adjustment: Volume setting (4-digit digital display)
- Rotation Speed (rpm): -1
- Safety device: Thermal protector, current limiting circuit, chuck cover linked fail-safe function
- Type: High Output
- AS ONE Tornado Agitator With TimerDeskripsi:A small, high-output, low-coking, low-vibration, low-noise DC brushless motor with a newly designed magnetic circuit (PAT) is used, allowing stirring work to be performed without compromising the experimental environment. The speed feedback system always responds to changes in the load during stirring and maintains the set rotation speed. The safety device is standardly equipped with a fail-safe function (automatically stops the motor when the chuck cover is opened) that interlocks the motor operation with the current limiting circuit, thermal protector and chuck cover. A forward/reverse rotation function is also standard equipment, and the direction of rotation can be switched with a single touch even during stirring. The setting of ON/OFF and number of rotations adopts the volume method with a switch, and it is excellent in operability. A hand-tightened chuck that does not require a chuck handle is used, and one-handed operation is possible with the motor lock mechanism linked to the chuck cover. The agitation shaft is supported by a collet method, which has high retention force and suppresses core run-out, and supports forward/reverse function (the diameter of the agitation shaft can be changed with an optional collet).atribut:
- Power Supply (V): 100 (AC) (50/60Hz)/(80VA)
- Type: with timer
- Motor: DC brushless motor 30W (Class B insulation/130℃)
- Chuck: Collet type manual chuck for 8mm
- External Dimensions (mm): 98×155×164
- Accessories: Clamp x 1, Stirring rod 8 x 495mm x 1, Stirring blade propeller type 50mm x 1, Ground adapter x 1
- Function: Forward/reverse switching function
- Mass (kg): 2.5
- Rotation Adjustment: Volume setting (4-digit digital display)
- Rotation Control: Speed feedback control
- Rotation Speed (rpm): -1
- Safety device: Thermal protector, current limiting circuit, chuck cover linked fail-safe function
- Timer Function: ON/OFF timer setting range: 1 minute to 99 hours 59 minutes (1 minute increments) Automatic reversal time setting range: 1 minute to 99 hours 59 minutes (1 minute increments)
- TSURUMI PUMP Pompa Agitator 3 Phase Anti Abrasiatribut:
- Motor Output (HP): 22
- Phase: Three
- Rated Current (A): 208V: 55, 230V: 52, 460V:24, 575V: 20
- Motor Speed (rpm): 1735
- Discharge Size (inch): 4
- Diameter (inch): 24 5/16
- Height (inch): 34 5/8
- Max. Solids Dia. (inch): 1.18
- Continuous Running Water Level (inch): 12.375
- Pump Weight (lbs): 485
-
- AS ONE High Torque Low Speed Agitatoratribut:
- Maximum Torque: 3.92J
- Power Supply (V): 100 (AC)/(50/60Hz)
- Body Dimensions (mm): 240×125×250
- Safety device: Thermal breaker fuse Glass fuse 5A
- Accessories: 1 clamp holder 1 marine type propeller 50mm 8×500mm shaft 1
- Mass (kg): 6.8
- Motor Power (W): DC150
- Rotation Speed (rpm): -1
- TSURUMI PUMP Pompa Agitator Seri KTD (Pompa Celup)atribut:
- Phase: 3
- Starting Method: D.O.L
- Solids Passage (mm): 10
- Capacity (m³/minute): 0.45
- Continuous Running Water Level (inch): 5.5
- Dimension D (inch): 9.25
- Dimension D (mm): 221
- Dimension H (inch): 23.19
- Dimension H (mm): 519
- Discharge Size (inch): 2
- Maximum Capacity (GPM): 111
- Maximum Head (ft): 66
- Motor Output (HP): 2.7
- Motor Output (kW): 2
- Rotation Speed (rpm): 3410
- Total Head (m): 20
- B-ONE Laboratory Agitatoratribut:
- Speed (rpm): 100-2500
- Plate Dimensions (mm): 200x300
- Maximum Volume (L): 3
- Maximum Liquid Viscocity (cP): 10000
- Voltage (V/Hz): 220/50
- Power (W): 60
- Meiji Agitator Cup Suctionatribut:
- Type: Agitator cup gravity
- Capacity (L): 0.45
- Air Pressure (MPa): 0.2-0.35
- Paint Viscosity Range Second: 10-20
- Applicable Spray guns: F110-S,F110L-S,F-ZERO-S
- Air Consumption (L/minute): 15-30
- DLAB Agitator Pro Typeatribut:
- Compatible Shaft Diameter (phi mm): 0.5-10
- Meiji Agitator Cup Gravityatribut:
- Type: Agiator cup suction
- Capacity (L): 0.75
- Air Pressure (MPa): 0.2-0.35
- Paint Viscosity Range Second: 10-20
- Applicable Spray guns: F110-G,F110L G,F-ZERO, FINER II PLUS, FINER SPOT
- Air Consumption (L/minute): 15-30
- KRISBOW Tank Pengaduk Cat Agitator Tekanan UdaraDeskripsi:Air Agitation Pressure Tank 20Latribut:
- Air Pressure (bar): 1.5-3.5
- Maximum Air Pressure (bar): 5.5
- Waterplus Pompa Celup Air Tanah dengan Agitatoratribut:
- Voltage (V): 1 x 220 (50Hz)
- Max. Head (H max) (m): 6.5
- Outlet Connector (mm): 25/32/40
- Suction (Hs) (m): 0.33
- Pump Outlet (inch): 1.25
- Cable Length (m): 6
- Max. Capacity (lpm/m³h): 148/8.9
- Power P2 (W): 250
- Weight (kg): 7.2
- Waterplus Pompa Celup Air Tanah Otomatis dengan AgitatorDeskripsi:Aluminium vortex pumps.atribut:
- Voltage (V): 1 x 220 (50Hz)
- Max. Head (H max) (m): 12
- Outlet Connector (mm): 50
- Suction (Hs) (m): 0.67
- Pump Outlet (inch): 2
- Cable Length (m): 6
- Max. Capacity (lpm/m³h): 210/12.6
- Power P2 (W): 500
- Weight (kg): 14
Daftar Harga jual agitator Terbaru September 2025
| ANEST IWATA Agitator | Rp12.999.900 |
| AS ONE Air Agitator | Rp34.999.900 |
| Anzen Agitator | Rp6.399.900 |
| AS ONE Tornado Agitator High Output | Rp27.999.900 |
| AS ONE Tornado Agitator With Timer | Rp25.999.900 |
| TSURUMI PUMP Pompa Agitator 3 Phase Anti Abrasi | Rp119.999.900 |
| Anzen Kepala Agitator | Rp4.499.900 |
| AS ONE High Torque Low Speed Agitator | Rp48.999.900 |
| TSURUMI PUMP Pompa Agitator Seri KTD (Pompa Celup) | Rp25.999.900 |
| B-ONE Laboratory Agitator | Rp17.999.900 |
Data diperbarui pada 07/09/2025 (Harga belum termasuk PPN)
Buka WhatsApp